Piaggio P180 Avanti Aircraft, shown on 3D photo, is a twin engine turboprop that is manufactured in Italy. This has 9 seating capacity, that can comfortably ride on its pressurized cabin and can be safely flown by one to two pilots. This is constructed with a horizontal stabilizer on its tail that gives flying stability to the aircraft, a laminar fuselage, and engines in its pusher configuration.
It was in 1980-1981 that Piaggio P180 Avanti Aircraft was tested in Italy and in U.S. Learjet has become the partner in the development of this aircraft from 1983 to January 1986. In was in September of 1986 that first prototype of this aircraft was flown and got its certification from Italy in March 7, 1990. It was in Wichita where 12 of the aircrafts fuselages were made and it was in Italy that this was finally assembled. However due to Avanti’s financial constraints in 1994 the assembly of this was temporarily stopped until Piero Ferrari invested on it in 1998. The 100th and the 150th were delivered in the year of 2005 of October and 2008 of May respectively. The Avanti has recorded 500,000 hours of flights for this aircraft in October 2010.
It was in 2005 of November that Avanti has obtained a certification for this aircraft from the U.S. as well as in Europe and was able to deliver a total of 70 planes. The important features of this plane include the high quality turboprop PT6 engines from Pratt & Whitney from Canada. This can fly 18 km per hour at with lesser fuel consumption at 70 percent mileage. Avionics suit are glass panel and more effective equipments are included in this aircraft such as navigation information, ground proximity, colored LCD displays, and graphic depiction of weather.
The general characteristics of Piaggio P180 Avanti Aircraft include cabin dimensions such as height measuring 1.75 m (5 ft 9 in), width 1.85 m (6 ft 1 in), and length 4.45 m (14 ft 7 in). This aircraft has a payload of 907kg or 2,000 pounds with a length of 14.4m or 47 feet and 3 1/2 inches. Its wingspan measures 14.03 m and a wing area of square meters, and height is 3.97m. Its weight when empty is 3,500kg and useful load is 1,860kg. It has a maximum takeoff weight of 5,239 kg. The plane has a maximum speed of 732 km/hr, cruise speed of 593 km, stall speed of 172 km, in 2,592 km range. Its service ceiling is 12,000m, the rate climb is 15m/s, the wing loading is 327 kg/square meters, and the power or mass of this plane is 0.24kW/kg.
Piaggio P180 Avanti Aircraft is the planes that are commonly used by well known air charters and companies. This has also been used by the military in different European countries such as in Bulgaria, Italy, and UAE. You can view stereoscopic photo of Piaggio P180 Avanti aircraft in in several 3D Photos formats.
* Crew: one or two pilots
* Length: 14.41 m.
* Wingspan: 14.03 m.
* Height: 3.97 m.
* the Area of wings: 16 m ².
* Weight of the empty: 3 400 kg.
* the Maximum speed: 732 km/h.
* Cruiser speed: 593 km/h.
* the Ceiling: 12 500 m..
* Range of flight: 2 592 km (at height of 11 900 m with an aeronavigation stock).
* the Maximum take-off weight: 5 239 kg.
* Take-off weight: 5 489 kg.
* Payload: 907 kg.
* Useful loading: 1 860 kg.
* Loading on a wing: 327 kg/m ².
* Engines: 2× Pratt and Whitney Canada PT6A-66, 634 kw everyone.
* Running start: 869 m.
* Run: 872 m.
* Passengers capacity: 9 persons.
* Salon: 1.75 m (height) х 1.85 m (width) х 4.45 m length.
* the Base price: 4 725 000$.

at 8:55 pm
The amount should I expect to pay to visit the lake district (Lake Como, Bellagio etc) in Italy?
at 9:45 am
about 400-500 euro
at 3:59 am
This is a comment to the admin. I came to your “3D Photos of Piaggio P180 on Epoch 3D” page via Google but it was difficult to find as you were not on the first page of search results. I see you could have more traffic because there are not many comments on your site yet. Hope this helps
Take care.
at 3:54 am
Hi, i think that i noticed you visited my 3d pics site thus i got here to “return the choose”.I’m trying to to find issues to improve my site!I guess its good enough to make use of some of your concepts!!
at 6:16 am
Very interesting 3d photos ! Perfect just what I was searching for!
at 5:03 pm
Very interesting 3d images ! Perfect just what I was searching for!
at 4:34 am
Nice site. I be taught something more difficult on completely different blogs everyday. It’s going to all the time be stimulating to view 3d images from different 3d photographers and observe a bit of one thing from their store. I’d desire to use some with the 3d content on my blog whether you don’t mind. Natually I’ll offer you a link in your internet blog. Thanks for sharing.
at 6:33 pm
What’s Happening i’m new to this, I stumbled upon this I’ve discovered It positively helpful and it has aided me out loads. I hope to give a contribution & aid other customers like its helped me. Great 3d images there.
at 10:50 am
Ne’er look 3d photos, thanks for letting me know.
at 9:05 pm
This 3d images blog has inspired me to continue writing on my own blog
at 8:08 pm
I appreciate your intriguing post. awesome 3d photos. I hope you write many. I will carry on reading
at 2:33 am
I regard something truly interesting about your 3d web blog so I saved to bookmarks .
at 5:30 pm
Very interesting 3d pics !Perfect just what I was searching for!
at 2:51 pm
Very interesting 3d blog! Perfect just what I was searching for! “If you could choose one characteristic that would get you through life, choose a sense of humor.” by Jennifer Jones.
at 6:44 am
Spot on with this write-up, I honestly believe that this amazing 3D site needs much more attention. I’ll probably be returning to read through more, thanks for the information!
at 1:49 am
It is perfect time to make some plans for the future and it’s time to be happy. I have read this post and if I could I want to suggest you few interesting things or suggestions. Perhaps you can write next articles referring to this 3d photos. I desire to read more things about it!
at 1:24 pm
I just want to mention I am just very new to 3d blogging and site-building and honestly liked this web site. Probably I’m planning to bookmark your website . You absolutely have terrific article content. Regards for revealing your web site.
at 7:28 pm
[...]one of our guests lately recommended the following 3d website[...]
at 12:57 pm
Hey I was wondering if ayonne could tell me which universities are the best (anywhere) for creative 3d photos ? I’m not interested in any universities in ontario because they dont offer the type of courses I want. I was also wondering if maybe there are schools specifically for creative writing? Please help me out, I have to apply in Dec, and I have no idea where I’m going, I just know that I want to write, because writing is my life, and I cant see myself doing anything else. Thanks..
at 9:48 pm
3D Photo of Piaggio P180 Avanti was shared. Cheers, Triche2500
at 6:54 pm
Next time I read a 3d blog, I hope that it won’t fail me as much as this particular one. After all, Yes, it was my choice to read through, nonetheless I actually believed you’d have something helpful to talk about. All I hear is a bunch of moaning about something that you could possibly fix if you were not too busy seeking attention.
at 6:24 am
Howdy! This is kind of off topic but I need some help from an established 3d blog. Is it hard to set up your own 3d blog? I’m not very techincal but I can figure things out pretty quick. I’m thinking about making my own but I’m not sure where to start. Do you have any tips or suggestions? With thanks
at 5:35 am
I simply want to mention I’m newbie to blogging and actually enjoyed your 3d web site. Likely I’m going to bookmark your blog post . You absolutely come with outstanding posts. Many thanks for sharing with us your website.
at 8:49 am
I truly treasure your piece of work, Great 3d pics.
at 2:50 pm
I do agree with all of the concepts you’ve introduced on your 3d photographs. They’re really convincing and will definitely work. Nonetheless, the posts are very short for newbies. May you please extend them a little from next time? Thank you for the 3d pics.
at 5:30 pm
Always a good 3d pics right here. Keep rolling on thorugh.